Grape Wine Bottle Night Light

Playing With My Marbles

 Things You Need

• Wine Bottle
• Marbles
• Craft Christmas Lights, green wire, 20-35 lights
• Hot Glue Gun
• Raffia
• Silk Grape Leaves, with curly stems
• Glass & Tile Drill Bit, I used 5/8" Glass & Tile Drill Quad Tip
• Drill
• Fine Grit Sandpaper, I used 220
• Safety Glasses & Leather Gloves

Process

• When cutting the foil top off, do it evenly and without tearing it, save it.
• Uncork and drink the wine, then rinse bottle out.
• Drill hole in back of bottle.I used 5/8" glass & tile quad tip drill bit, WD40, safety goggles, and leather gloves.
• Sand the edges of the drilled hole, clean, rinse and let bottle dry.
• Feed lights thru hole and thru top of bottle, then start adjusting the lights evenly. Turn them on to make sure it looks good.
• Glue marbles on bottle.
• Glue grape leaves and curly stems on bottle. Just put glue on the end and place  the stem in between marbles, hold until dry.
• Poke hole in top of wine cork, stick curly stem in, can dap glue in hole.
• Glue other end of cork curly stem to bottle where raffia will be. 
• Wrap raffia around bottle neck, and tie raffia off and place a dap of glue on knot.
• Dap a little glue on bottle top and replace foil top.
• Personalize the back label
• There are so many ways to drill a hole in glass bottles, check out YouTube for videos.